NR
Mechanical Engineer, Electrical Engineer, Robotic Controls Engineer
Nirvana RoboticsNew York, NYposted 16d ago
- PayUSD / yr
- $220k – 300k
- Where
- New York, NY
- Posted
- Nov 5
- 16 days ago
- Type
- Full-time
- Setup
- On-site
EMPLOYMENT
Full-time
COMPENSATION
$220k - 300k/yr
ARRANGEMENT
On-site
At a glance
Build and own mechanical, electrical, or low-level controls subsystems for humanoid robots, from prototype through production. Work hands-on with robotic arms and real hardware in Nirvana Robotics’ NYC team.
Summarized by AI from the original posting
What you'll do
- Own a robotics subsystem end to end on physical robots
- Design robotic arms and manipulators
- Optimize joints, actuators, transmissions, and end effectors
- Prototype using additive manufacturing and precision machining
- Take mechanical assemblies to production
- Develop electrical architecture for robotic arms and humanoids
- Design power distribution, motor-driver boards, sensor PCBs, and harnessing
- Perform multilayer mixed-signal and high-current layout
- Develop BLDC drivers and current sensing
- Conduct bench bring-up and design for manufacturability with PCBA partners
- Develop low-level control for multi-DOF arms
- Implement joint-level actuation, impedance/admittance control, and whole-body control
- Develop sim-to-real systems
Requirements
- 01Hands-on experience with real robot hardware
- 02Experience with robotic arms, grippers, mobile manipulators, actuated joints, or humanoids
- 03Mechanical: 5+ years with a bachelor's or 3+ with a master's
- 04Electrical: 5+ years with a bachelor's or 3+ with a master's
- 05Controls: BS plus 4 years, MS plus 2 years, or a PhD
- 06US-based
- 07Relocation to New York City supported
- 08Visa sponsorship unavailable
Perks
Relocation to New York City within the US is supported
Skills
Mechanical DesignRobotic ArmsManipulatorsJointsActuatorsTransmissionsEnd EffectorsTorque DensityBackdrivabilityStiffnessAdditive ManufacturingPrecision Machining
Full description
Nirvana Robotics | Mechanical Engineer, Electrical Engineer, Robotic Controls Engineer | New York, NY | ONSITE | Full-time | $220K-$300K
Nirvana Robotics builds humanoid robots with robotic arms that work in industrial environments. Their hardware team in NYC is growing, and each of these roles owns a subsystem end to end on physical robots. I'm a recruiter at Niuro, Nirvana's hiring partner for these roles; the links below go to our application form and I read every application myself.
Mechanical Engineer ($230K-$260K): mechanical design of robotic arms and manipulators: joints, actuators, transmissions, end effectors. You optimize for torque density, backdrivability and stiffness, prototype with additive and precision machining, and take assemblies to production. GD&T, tolerance stack-ups, SolidWorks (or Creo/NX/Onshape).
Apply: https://app.niuro.io/source/H4yYHesP?ref=ps_EBRp88zU7jcdRZm8...
Electrical Engineer ($220K-$250K): electrical architecture for arms and humanoids: power distribution, motor-driver boards, sensor PCBs, harnessing. Multilayer mixed-signal and high-current layout in Altium, BLDC drivers and current sensing, bench bring-up and DFM with PCBA partners. EtherCAT, CAN or BMS is a plus.
Apply: https://app.niuro.io/source/BeVx3CrN?ref=ps_5biniQ0FTotNxfmT...
Robotic Controls Engineer ($270K-$300K): low-level control for multi-DOF arms: joint-level actuation, impedance/admittance and whole-body control, sim-to-real. PID/LQR/state-space, MoveIt or cuRobo, C++ and Python, ROS 2.
Apply: https://app.niuro.io/source/gUNqx8Lj?ref=ps_BdIAhZPrP7yQt2P4...
For all three: hands-on work on real robot hardware (arms, grippers, mobile manipulators, actuated joints or humanoids). Mechanical and Electrical: 5+ years with a bachelor's or 3+ with a master's. Controls: roughly BS + 4 years, MS + 2 or a PhD. US-based; relocation to NYC within the US is supported. Visa sponsorship is not available.